Decorative filler ARDEKOMIN 25kg linear 3mm

Used

• On thermal insulation panels as a final face

• On an already smoothed (leveled) wall

• Exterior as well as interior

Features

• Easily mixed only in water

• Frost-resistant

• Waterproof

• Breathable (vapor permeable)

• Painting

• If an insulation panel is being installed, make sure that it is firmly attached to the wall and that there is no gap between the wall and the insulation panel.

• The panel (foam, foam or expious) is plastered with QIS SIVAMAX plaster by embedding the mesh.

• The application surface must be cleaned of any interfering materials (oil, paint, varnish, etc.)

• When working in hot weather, the surface must be cooled before applying the plaster.

• Dec. The surface must be primed before plastering

• 25 kg of powder dissolves in approximately 5.5 – 6.50 kg of water

(Water percentage %22-26)

It is noteworthy

• After treating the wall, the surface must be protected from direct sunlight for 12 hours, and it must not be exposed to rain or frost.

Expense

2 – 3 kg / m2