Showing results 31–60. 85 products in totalSorted by popularity

Waterproofing

Show filters
Display 9 12 18 24
QIS BANT Butyl Self-Adhesive Tape.jpeg
Compare
Quick view
Add to favorites

Butyl self-adhesive tape QIS BANT 10m x 25 cm

In stock

120,00 ₾ Piece
In the cart
QIS ALB UV Aliphatic polyurethane UV resistant coating
Compare
Quick view
Add to favorites

QIS ALB UV Aliphatic polyurethane UV resistant coating

In stock

695,00 ₾ Set
In the cart
TEKC liquid glass 5 kg
Compare
Quick view
Add to favorites

TEKC liquid glass 5 kg

In stock

28,00 ₾ Piece
In the cart
Epoxy resin transparent QIS EPO MAX 6kg
Compare
Quick view
Add to favorites

Epoxy resin transparent QIS EPO MAX 6kg

In stock

195,00 ₾
In the cart
Polyurea insulation coating QIS POLIS SF
Compare
Quick view
Add to favorites

Polyurea insulation coating QIS POLIS SF

Available for pre-order

7500,00 ₾
In the cart
Liquid glass 1.3 kg
Compare
Quick view
Add to favorites

TEKC liquid glass 1.3 kg

In stock

9,00 ₾
In the cart
For waterproofing concrete and brick structures, protecting steel pipes, etc.
Compare
Quick view
Add to favorites

Bitumen primer foundation insulation 16 kg

In stock

80,00 ₾
In the cart
Polyurethane sealant sealant black 600ml QIS POMA
Compare
Quick view
Add to favorites

Polyurethane sealant sealant black 600ml QIS POMA

In stock

23,00 ₾
In the cart
Waterproofing elastic tape QIS ELASTIK PB 12
Compare
Quick view
Add to favorites

Waterproofing elastic tape QIS ELASTIK PB 12

In stock

175,00 ₾
In the cart
Epoxy mortar anchoring mixture QIS QPOX
-18%
Compare
Quick view
Add to favorites

Epoxy mortar anchoring mixture QIS QPOX – 5 kg (3.75 kg +1.25 kg)

In stock

Original price was: 116.00 ₾.Current price is: 95.00 ₾. Set
In the cart
Self-adhesive tape water seal Bentonite
Compare
Quick view
Add to favorites

Self-adhesive tape bentonite QlS BK SWELL 20/5 Bentonite

In stock

11,00 ₾
In the cart
Liquid waterproofing material - QIS ACRIMAX 20kg
Compare
Quick view
Add to favorites

Liquid waterproofing material QIS ACRIMAX 20kg

In stock

130,00 ₾
In the cart
QIS JOINT 6 - Polyethylene joint filler 6 mm
Compare
Quick view
Add to favorites

QIS JOINT 6 – Polyethylene joint filler 6 mm

In stock

0,70 ₾ 1 length/m
In the cart
QIS JOINT 10 - Polyethylene joint filler 10 mm
Compare
Quick view
Add to favorites

QIS JOINT 10 – Polyethylene joint filler 10 mm

In stock

0,75 ₾ 1 length/m
In the cart
Waterproofing tape QIS PB BAND 12 cm - 10 m
Compare
Quick view
Add to favorites

Waterproofing tape QIS PB BAND 12 cm – 50 m

In stock

145,00 ₾ Piece
In the cart
Armstrong suspended ceiling foiled 595*595*8mm
Compare
Quick view
Add to favorites

Armstrong suspended ceiling foiled 595*595*8mm

In stock

15,00 ₾ 1 sq m
In the cart
Epoxy primer QIS EPO ASTAR NT
Compare
Quick view
Add to favorites

Epoxy primer QIS EPO ASTAR NT

In stock

595,00 ₾
In the cart
Waterproofing tape QIS PB BAND 12 cm - 10 m
Compare
Quick view
Add to favorites

Waterproofing tape QIS PB BAND 12 cm – 10 m

In stock

39,00 ₾
In the cart
Compare
Quick view
Add to favorites

QIS TERMOMAX thermal insulation paint

In stock

195,00 ₾
In the cart
Application QIS POLIMES HB - one-component, liquid, ready-to-use, UV-resistant, solvent-free, high-tech waterproofing coating material. Produced using hybrid polymer technology. Areas of application • For indoor and outdoor use • As a coating material on balconies and terraced roofs where there is pedestrian traffic • For repairing cracks up to 2 mm on almost all surfaces, including mineral surfaces such as concrete, stone, marble, ceramics, tiles, all types of wood, glass, metal, tiles, bricks, concrete, aerated concrete • In wet areas such as bathrooms, kitchens • In drinking water tanks • For waterproofing horizontal surfaces or repairing sections with self-leveling function against ground moisture in areas below ground level such as foundations, garages, basements • Used on balconies, terraces or sloping roofs that require waterproofing, chimneys, ventilation. Characteristics • Medium elasticity, suitable for light pedestrian traffic. • Maintains elasticity and adhesive properties in joints of cracks that form and grow with building movement. • Adheres perfectly even to damp surfaces without primer and provides high adhesion. • Does not contain solvents and isocyanates that are harmful to the environment and human health. • Can be used both indoors and outdoors, on horizontal and vertical surfaces. • Resistant to UV rays, does not crack, does not yellow and does not leak. • Easy and quick to apply with a brush or roller. • Does not create a joint. • 100% elastomeric and does not lose volume, as it does not contain solvents. • After drying, it retains elasticity even at low temperatures, can be painted. Application Method Surface Preparation • The surface to be applied must be cleaned of anti-adhesion materials such as dust, oil, resin, tar, paint, silicone, hardener, detergent and mold oils. • Weak parts of the concrete must be repaired with QIS REPFIX 500S, static cracks must be repaired with QIS QLATEX plaster mixture. • Dynamic (moving) cracks must be filled with QIS POMA 35 polyurethane sealant. • Water inlet holes must be sealed with QIS PLUG. Under normal conditions, the use of a primer is not necessary. QIS POLIMES HB is ready for use. No external substances must be added. Before use, it is mixed with a suitable mixer for at least 2 minutes. QIS POLIMES HB is applied directly to the surface with a brush or roller. QIS POLIMES HB is applied to the surface in at least two layers, perpendicular to each other. An interval of 6-12 hours is required between coats. If a smooth finish is desired at the edges of the application area, the specified area can be limited by protective tape. The protective tape must be removed no later than 5 minutes after application. The application area is opened for use within 24-48 hours. Final drying occurs after 7 days. Conditions of use • In cases where the ground temperature is below +5°C and above +30°C, the material should not be used. • The material must be protected from rain, frost and direct sunlight for the first 24 hours after application. (+20°C) • The surface to be applied must not be wet. QIS POLIMES HB is resistant to up to 10% moisture on the surface. Moisture-resistant polyurethane or epoxy primers can be used on surfaces with high humidity before application. Consumption 1.50 kg/m2. (For 1 mm thickness Technical data Material structure - low viscosity elastomeric liquid Color: gray Density 1.44 g/ml (23°C and 50% RH) Shore A hardness 30 ± 5 Elongation > 300 Curing rate 2.00 mm/day (23°C and 50% RH) Application temperature + 5°C / + 30° Service temperature C- 30°C / + 80°C The above values ​​are given at +20°C and 50% relative humidity. Higher temperatures reduce the time, lower temperatures extend it.
Compare
Quick view
Add to favorites

Polymer waterproofing hybrid QIS POLIMES HB

In stock

350,00 ₾
In the cart
PVC membrane PVC waterproofing UV
Compare
Quick view
Add to favorites

PVC PVC membrane sun-resistant UV 2mm

In stock

19,00 ₾ 1 sq m
In the cart
geomembrana-geomembrana-geomembrana
Compare
Quick view
Add to favorites

Geomembrane HDPE GEOMEMBRAN 1.5 MM 600 sq/m

Out of stock

9,00 ₾ 1 sq m
Read more
TPE Slot Insulation Tape Thermoplastic 2 Expansion Joints
Compare
Quick view
Add to favorites

Insulation tape TPE 25/1.5 / 25m

In stock

390,00 ₾
In the cart
Compare
Quick view
Add to favorites

Insulation tape TPE 20/1.5 / 25m

In stock

295,00 ₾
In the cart
Crystallized waterproofing QIS NEGAMAX 2K 25+3kg two-component
-36%
Compare
Quick view
Add to favorites

Crystalline waterproofing QIS NEGAMAX 2K 25+3kg

In stock

Original price was: 280.00 ₾.Current price is: 180.00 ₾. Set
In the cart
QIS POOLTECH outdoor pool liner
-16%
Compare
Quick view
Add to favorites

QIS POOLTECH outdoor pool liner

In stock

Original price was: 220.00 ₾.Current price is: 185.00 ₾. Piece
In the cart
Pool-waterproofing-waterproofing
-11%
Compare
Quick view
Add to favorites

Liquid pool insulation coating QIS HSD 2K

In stock

Original price was: 665.00 ₾.Current price is: 595.00 ₾. Set
In the cart
Bitumen colored end face coating BITUMARD
Compare
Quick view
Add to favorites

Bitumen green end face coating BITUMARD

In stock

110,00 ₾
In the cart
Bitumen colored end face coating BITUMARD
Compare
Quick view
Add to favorites

Bitumen red end face coating BITUMARD

In stock

110,00 ₾
In the cart
Bitumen rubber hydrosize coating 30kg QIS BITUMAX 1K
-19%
Compare
Quick view
Add to favorites

Bitumen rubber hydrosize coating 30 kg QIS BITUMAX 1K

In stock

Original price was: 185.00 ₾.Current price is: 150.00 ₾. Piece
In the cart
Load more products
Loading...